Toy'n around, a Genesis Company, is a retail sales and marketing company. With in-depth market and retailer knowledge paired with decades of success, a proven process, and proprietary analytical tools, we are here to help you scale your brand in retail.

RxFunction®, Inc. is a medical device company with a mission to design and market medical technologies that improve balance, increase mobility, and enhance confidence for patients. Walkasins® Lower Limb Sensory Prosthesis is clinically proven to improve gait and balance, and reduce the risk of falls. Walkasins replaces part of the lost nerve function for the feet. It is intended for individuals who experience numbness in their feet and struggle with mobility problems due to peripheral neuropathy. Walkasins is only available by prescription. To learn more, please visit us at www.rxfunction.com. RxFunction created Walkasins by building upon patented technology developed by co-founder and scientist Lars Oddsson, PhD. Development of Walkasins was supported by Small Business Innovation Research grants from the National Institutes of Health and is manufactured in Minnesota. RxFunction is the exclusive provider and manufacturer of Walkasins. Caution: Individual results and activity levels while using Walkasins may vary depending on many factors. There are risks associated with the use of this product and there are certain individuals who should not use the product. Only a qualified clinician can tell you if this product is appropriate for you and your individual circumstances. Please consult with your healthcare team for complete information regarding benefits, risks, and possible outcomes.

LCS Precision Molding, Inc. has been in business for over 40 years servicing the plastic injection molding needs of our valued customers. We are an ISO 9000 – 2008 certified company, registered by Bureau Veritas Certification North America, Inc. LCS is structured to provide customers with one-stop service for custom injection molding projects. We take great pride in our service-oriented sales staff, experienced engineering department, and a high-performance, computer-integrated injection molding factory featuring 14 injection presses ranging in size from 50 to 300 tons. LCS can help take your project from design phase into full scale production. Our engineering department can assist with part design, prototyping, resin selection, and source the most cost effective tooling available through both domestic and Asian toolmaking partnerships. Our factory specializes in cost effective short run manufacturing, part assembly, min/max stocking programs, short lead times and consistent OTD record of >95%.

The inventor and founder Carl Towley was obsessed with fitness. Throughout all of his numerous gym visits throughout the country, the story was the same everywhere he went- dumbbells chaotically taking up precious floor space. There had to be a better way. Many people had attempted to build a better dumbbell, but their solutions were always too complicated, fragile or impractical. Carl put together the concept of a nested weight stack with a handle secured by a U-shaped pin, the ‘ahh ha’ moment! Within 24 hours of that, the prototype that is the foundation of all PowerBlock dumbbells was born. Please visit powerblock.com to learn more.

Atrix was established in Burnsville, MN in 1981 as Atrix Tool Company. As part of becoming a NASDAQ publicly traded company in 1989, we changed our name to Atrix International, Inc. In 1999 we went private and in 2009 we implemented an Employee Stock Ownership Plan (ESOP). We are a premier USA manufacturer of fine filtration vacuums and filters. We sell our products through a network of distributors and to corporations in over 40 countries. In addition, we distribute ESD products, tools and tool kits. We hold several patents on our filtration and electronic monitoring products.

Industrial & Environmental Concepts, Inc. (IEC) is a leading designer, fabricator, and installer of innovative geomembrane Cover and Liner systems for industrial, municipal, and agricultural water and wastewater treatment facilities. We have a broad range of products to meet your needs and solve problems such as: biogas collection on anaerobic digesters and lagoons, biogas storage, odor-control, algae-control, and heat-retention. We have many other complimentary products available as well. Please contact us or visit our website to learn more!

LORC (Lindø Offshore Renewables Center) is the leading test center for making renewable energy viable offshore, with state-of-the-art test and infrastructure facilities. LORC´s testing activities includes e.g. Nacelle Function Test and Highly Accelerated Life-time Testing (HALT) in the 10 MW regime, Mechanical Testing at Strong Floor and Climate Testing including Salt Spray. LORC is a non-profit and independent commercial foundation, founded in 2009 by the major players in the offshore renewables sector. The aim is to improve product reliability and consequently lower the Cost of Energy extracted from green offshore sources. Lindø Nacelle Testing is for power outputs of up to 10 MW. The Nacelle Testing Center has two test-docks: The Function Tester of LORC performs testing of the influence of the internal and external electrical dynamics on the complete nacelle, including the hub. Furthermore, the Function Tester is a test facility where international grid codes can be tested in combination with rapidly changing wind speed conditions, which characterize offshore locations. The other nacelle test-dock offers HALT, Highly Accelerated Lifetime Testing. It enables customers to verify the expected quality level of the nacelle, as 20-25 years operation can be simulated in less than half a year. All of the Lindø Nacelle Testing Center has crane coverage up to 1000 tonnes, for the largest nacelles to be tested. Lindø Component & Structure Testing focuses on full-scale and Mechanical Testing at a Strong Floor in the MN regime and Climate Testing in one of the world largest climate chambers, where humidity and temperature can be controlled, as well as salt spray added to simulate real offshore conditions. Lindø Welding Technology offers state-of-the-art welding services and consultancy. LORC Welding Technology is equipped with one of the world’s most powerful laser systems capable of delivering up to 32 kW of laser power for welding applications. Lindø Component & Structure Testing and Welding Technology are constantly developed in close cooperation with our industrial partner, Force Technology. Visit the world largest Test Center for making renewable energy viable offshore at www.lorc.dk

Black Forest is a proud manufacturer of corporate recognition jewelry and employee reward programs. We can design, implement and manage an employee recognition program that will engage talent and recognize achievers. Our dedicated corporate recognition team will help you combine custom jewelry, service awards, corporate rings, sales incentives, championship rings and more to create a custom award program that will Recognize, Motivate and Reward. Learn more at BlackForestLtd.com Members of ASI: 40620, PPAI: 111489 and SAGE: 24243

Agnitron Technology is a supplier of custom, state-of-the-art, MOCVD equipment for production and R&D and has a track record of success delivering III-V, III-N and oxide material growth solutions to leading universities, government laboratories and major industrial groups around the world. Company core competencies are in the areas of Equipment Engineering, Automation and Controls, Material Science, and Process Engineering. Agnitron product offerings include MOCVD equipment, process equipment control solutions, and related equipment parts support and services. Agnitron also offers contract R&D services at our state of the art MOCVD growth laboratory where equipment is available for growth of III-N and various oxide materials.

Hill Hiker® lift systems help residential and commercial customers all over the world traverse the most hard-to-reach locations. If you own real estate on a steep hillside, waterfront property or require easier access to your home or place of business, the Hill Hiker® hillside elevator is right for you. You will enjoy the convenience, safety, value and reliability of the best designed incline elevator on the market today. Hill Hiker Inc. is a small family owned manufacturing and contracting company specializing solely in outdoor hillside lift systems. Hill Hiker Inc. is based in Minneapolis, Minnesota but serves the World with our nearly 100% American made systems. Hill Hiker Inc. can handle your project from planning and permitting to manufacture and installation.

People come to us when they are thinking about building a new rink, updating their existing facility or they need supplies and equipment. We work with architects, contractors, ice rink owners and operators. We have been in business since 1988 and get most of our business from referrals

We do all the work - you get all the glory! We specialize in taking our standard catalog items and tweaking them to suit your client.