RAE Corporation is a manufacturer of engineered cooling and refrigeration systems headquartered in Pryor, Oklahoma, approximately 45 miles northeast of Tulsa. Our goal is to provide properly designed systems to meet the needs of our customers. RAE Corporation operates a 230,000 square foot manufacturing facility and employs over 400 people. Our plant is designed to accommodate the material inventories, manufacturing area, quality assurance stations and test and product development areas required to meet the needs of the most discerning customers. RAE Corporation has five sales divisions: Technical Systems, Century Refrigeration, Refrigeration Systems, RAE Coils and ZeroCool Systems. RAE Corporation’s products are marketed nationwide by more than 120 sales offices maintained from coast to coast and ready to work with the customer on their special needs applications.

MIRATECH is an industry leader that provides advanced, cost-effective, reliable, and mission critical emission and acoustical solutions for natural gas, diesel, bi-fuel, biofuel, and biogas powered engines. Our reputation is associated with a customer centric consulting approach, advanced engineering expertise, extensive industry and regulatory knowledge, project management, responsiveness, and quality products. These attributes have enabled MIRATECH to be highly adaptable and able to accommodate both small (HP < 300) and large (HP > 10,000) engine applications. MIRATECH creates value in the energy infrastructure, power generation, industrial, marine, and OEM markets by helping customers meet their regulatory requirements for pollutants and noise, while reducing the hassle and complexity of emissions compliance. Our product offering includes catalysts, silencers, heat recovery, and monitoring systems that reduce exhaust constituents such as nitrogen oxides (NOx), carbon monoxide (CO), volatile organic compounds (VOC), particulate matter (PM), hazardous air pollutants (HAPs), and noise. MIRATECH has a sales network throughout the world, consisting of a direct sales force, internal sales team, independent representatives, distributors, and field technical specialists. With this network, the company is geared for increased international expansion. MIRATECH is “Engineered to Perform”. This is a declaration of who we are, what we do, and what we stand for. Our passion is performance and quality! We have engineered our own company to perform, so that we can do the same for our customers and their emission and acoustic control requirements. Our philosophy, our character, and our differentiation set us apart. We just don’t sell product. We develop relationships and partnerships with our customers. Together as a team, we analyze, manage, and collaborate to find the best solution that will satisfy our customers’ application and project needs. Then, we execute.

Southwest Electric is one of the foremost remanufacturing, manufacturing and service companies for electrical equipment in the central United States. We provide repair, maintenance, testing, redesign, manufacturing, remanufacturing and replacement services for rotating equipment, switchgear, transformers and associated apparatus. We have several facilities in the United States staffed to meet the customer’s needs along with certified, experienced service technicians to perform work at the customer’s site. Specialty Transformers are manufactured under a variety of patents held by the Company. From our engineers, assemblers and service technicians to our patented designs, our service and our support, you will not find a more skilled solution provider.

Motor Controls, Inc. (MCI) offers customers complete system and control solutions. We serve OEMs from concept to design, development to manufacturing and provide continuing technical support to meet their exact needs. Addressing applications in a broad range of industries, our in-house engineers work closely with customers to translate their stated needs and specifications into control systems that drive processes and machinery precisely as required. Established in 1980, MCI has placed controls systems throughout the United States and around the world, increasing our capabilities to deliver quality products to our customers. Because quality is our top priority, we are certified to ISO 9001:2008. We design and manufacture to UL508a, 698A, 778, 1640, 50 and CSA standards. In our 250,000 Square-foot facility located in Dallas, Texas, MCI operates as one of the largest and the most vertically integrated control builders in North America. These extensive in-house capabilities allow MCI to meet the most demanding requirements of design, quality, delivery, and price. Some of the products and services that are unique to MCI include the in-house design and manufacture of UL listed enclosures, cabinets, skids, and racks. We have a fully automated powder coat line and a batch powder shop capable of handling cabinets and racks up to 20 feet in length. We also operate a complete wet paint facility. Additionally, the MCI graphics shop includes overlay design printing and laminating, we also provide permanent deep cut industrial engraving directly on enclosures. Silk screen, laser engraving, and a variety of printing services are also available. Nearly 34 years ago, we defined MCI quality as “Meeting our Customer’s requirements, every requirement, every time.” We continue to operate and build our business around this statement.

Incorporated in 1983 by four individuals to serve a regional market, Celltron has grown into an internationally known contract manufacturer of custom cable assemblies, wiring harnesses, and electro-mechanical sub-assemblies for defense, aerospace, and commercial customers. Over the years, many of the largest companies within the defense industry have been added to our customer base. Celltron also conducts significant direct government business and has been named a "Best Value Gold Medalist" by the Defense Logistics Agency. Business continues to grow steadily due to sound managment practices and successful leadership. Celltron has become an OEM by acquiring Vapours Systems, a chemical distribution system used in the semiconductor industry. This acquisition has allowed us to venture into new markets and gain experience in higher level assembly. Vapours customers include ST-Micro, STS, Intel, IBM, Kodak, and other microchip and wafer producers around the world in countries such as Germany, England, France, Spain, Italy, and the Netherlands. Celltron's diverse experience in various industries, such as medical, alternative energy, semi-conductors, aerospace, and defense enables Celltron to provide the best engineering ideas, practices, and technologies to benefit our customers. Celltron is classified as a "Veteran Owned Small Business" manufacturer that can benefit customers meeting government subcontracting goals.

Founded in 1966 as a regional oilfield meter supply company, UMC has grown into an international industry leader in the supply of LACT Units, Gas Compression, and Vapor Recovery Packages along with a variety of Production Equipment. UMC is well known both domestically and internationally for our cost-effective, high quality and dependable service and fabrication. In our over 50 years of service, UMC has built and deployed thousands of pieces of equipment that are serving oil and gas producers and midstream companies around the globe. Our equipment is currently operating in three continents and countless countries, ranging from South America to Northern Siberia at both land-based and offshore production sites. No matter where in the world you are working, we can supply and service your needs. Specializing in LACT Units ASME Code and Non Code Production Equipment Pump Skids Vapor Recovery and Gas Compression Pig Launchers and Receivers Field Service

Providing products that are available, reliable, and economical. Door Controls USA, offers the widest range of products in the automatic door industry. It does not make any difference which door brand, Door Controls USA has it. Before any door part is added to our extensive inventory, Door Controls USA's quality control department tests and inspects all products to meet our high standards. We offer commercial automatic and manual door parts. With our vast line of commercial hardware and parts, Door Controls USA is your one-stop-shop for all your automatic and manual door part needs. Our parts department is open from 7:00 a.m to 5:00 p.m. CST (M-F).

Wilspec Technologies, Inc. is a global manufacturer of Pressure Controls and Sensors, Electrical Controls and Valve and Line Components for the HVAC/Refrigeration and industrial markets. Founded in 2000, Wilspec Technologies is a privately-held company headquartered in Oklahoma City, OK, with facilities throughout North America, Europe, Asia, India and the Middle East. The company is dedicated to providing cost-effective and reliable products to assist customers in achieving sustainable solutions that offer innovative change in the global marketplace.

HSI Sensing provides custom and standard switching and sensing solutions. HSI Sensing manufactures reed switches and proximity sensors. These devices complete electrical circuit paths when magnetism is placed in close proximity to the switch or sensor. Our production process is very precise and known for making the most difficult types of switches. We manufacture reed switches small enough to fit inside a heart pacemaker as well as sensors which meet tough military standards for installation on aircraft engines and controls. Customers choose us for our outstanding reputation in product reliability, quality, special characteristics and customer service. Our product is sold throughout the world. Many customers turn to us because we specialize in the difficult-to-manufacture products. Our custom design capability and quick response times are the keys to our success. HSI Sensing began manufacturing reed switches in 1968. Continuous growth and facilities expansion have characterized the past 40 years. Manufacturing moved to our present location in 1976, and the physical plant has been expanded three times since then. The last expansion in 1998 added 15,000 square feet of manufacturing space, including a state-of-the-art electroplating facility.

Headquartered outside of Dallas, TX in the city of Garland, 1000Bulbs.com has provided businesses and homeowners a destination to find, learn about and buy light bulbs, fixtures and more for over 18 years. We partner with some of the largest brands and factories to provide a wide selection of products with value and customer satisfaction at the heart of all that we do. With over 200 employees, 1000Bulbs.com enjoys double digit sales growth and annual sales of eight figures. We have been included on the Inc. 5000 list of fastest growing companies in the US as well as ranked on the SMU Cox School of Business Top 100. Despite our growth, we never forget our humble beginnings. Founded in 1994 by CEO Kim Pedersen, 1000Bulbs.com began as an old door positioned over two saw horses in a spare bedroom of Kim's home. In 1995 Kim began investigating the then-new Internet as a portal to the marketplace. The next year 1000Bulbs.com was launched. It soon became evident the market was ready for this new buying experience. The company grew rapidly, creating jobs and growing customers along the way. Our corporate culture is customer-focused, fun and contagious which has allowed us to attract and retain some of the best talent in the DFW area. Find out why contractors, electricians, architects, hotel owners and others continue to choose 1000Bulbs.com as their source for Christmas lights, LED light bulbs, CFL bulbs, fixtures and accessories.