• Conduct groundwater monitoring for water impoundments on natural gas drilling sites. - Conduct low flow sampling using small pumps and HORIBA units on monitoring wells located around water impoundments. This is done to ensure that contained water is not entering groundwater aquifers located under the impoundments. • Preform leak detection on water impoundment liners. • Complete property inventories for mining permits. - Sample water sources including water wells, springs, ponds, etc. for specific parameters required by the PADEP for mining permits. - Take photos, GPS coordinates and complete field sheets based on the property survey, number of water sources and number of structures located on the property. - Prepare samples for laboratory analysis. Enter all field notes and results into databases which can be used by clients for the permitting process. • Oversee stream remediation and restoration projects. - Make certain that excavating companies follow environmental standards while operating in streams that have lost flow because of subsidence due to coal mining. - Determine areas of excavation and how many bores must be drilled into stream beds along with their spacing patterns and GPS coordinates. - Report the results of the remediation projects to coal mine supervisors and the PA DEP • Oversee the removal of contaminated soils on well pad sites. - Determine and outline potentially contaminated areas - Screen soils for clean readings, sample, and mark with a GPS unit to accurately show where contaminants have been removed from • Monitor stream flows for coal mining projects using a Marsh-McBirney device • Upload data into ERIMS: Environmental Management Information System • Work on a variety of projects including: - Water quality sampling, soil quality sampling, inventories, data entry and analysis, groundwater and surface water monitoring, geologic logging, well installation supervision, aquifer testing, and stream geology mapping.

Founded in 1982 to develop techniques to roll and cast depleted uranium for defense and energy applications, Manufacturing Sciences Corporation (MSC) is a premier leader in high quality metal fabrication. Our production capabilities include a full-service foundry, depleted uranium machining area, clean machining area, rolling mill, weld shop, quality inspection area, as well as a radiochemistry laboratory and analytical laboratory. During our tenure, we have developed application specific methods for microwave melting, rolling of various metal matrix composites, and niobium, tantalum, aluminum, and steel alloys, infra-red heating, micro-alloying, foil manufacturing, and dry machining of depleted uranium. We offer a variety of on-site resources including experienced personnel specializing in project management, technology, engineering (nuclear, mechanical, chemical, metallurgical, and civil), operations, radiation safety, and environmental health and safety. MSC has strong reputable relationships within the scientific research and regulatory communities and are also an active participant in the Tennessee OSHA Voluntary Protection Program (VPP), receiving our first certification 2000. During MSC’s 40 year tenure, we have worked with a multitude of international entities performing various scopes of work. We are a staple with international affiliates, as a resource to recycle depleted uranium, natural uranium, and components containing depleted uranium. With our experienced, diverse, and knowledgeable staff, we can help our customers take their ideas from concept to production.

We have been designing and building mechanical presses for more than 70 years, and in the North American market for almost 40 years. Worldwide, we have gained a reputation for quality, reliability, and proven performance. Our presses are manufactured by our own employees in our ISO-certifed factories in Taiwan and China. In addition, we have a full staff of electrical and mechanical engineers, sales / application specialists and 24/7 services / support personnel located at our 72,000 sq. ft. logistics and assembly facility in Manchester, TN (60 miles southeast of Nashville, TN). > We have the largest in-stock inventory of presses in the U.S., including Gap Frame presses, Straight Side, Forging presses and Servo Presses, ranging from 27 - 3300 tons. > Our capabilities include complete turn-key integration of press, quick die change, coil feeding, transfer system and other peripheral equipment. > With Stamtec, you’ll have local support through our national dealer network and select service centers.

American Metal Technologies is the industry leader in complete sourcing for machined ferrous and non-ferrous castings. As the flagship company in The AMT Group, American Metal Technologies resourcefully integrates our global capabilities with highly skilled manufacturing expertise to provide our customers unmatched quality and customer satisfaction. Our engineering-centered approach is grounded in cutting-edge technology to deliver innovative, cost-effective solutions that set the standard in the supplier market.

Dole Refrigerating Co is a machinery company based out of 1420 Higgs Rd, Lewisburg, TN, United States.

Our family of injection mold builders offers the highest quality products at very competitive pricing providing you, the Customer, the edge you need. Since 1976 we have been providing durable high production mold designs and molds for the automotive, medical, and appliance industries. We are now proud to offer full service plastic injection molding as well. We are ISO 9001:2008 Certified.

Triple Steel is a structural and miscellaneous steel fabricator and erector for the commercial and high end residential markets in the middle Tennessee market. We are a turnkey provider of services including detailing, fabrication, and erection/installation.

Located in Shelbyville, TN, Southern Precision Machining has been exceeding our customers’ expectations since 1991. Our 20,000 sq. ft. building is climate controlled, and our 14,000 sq. ft. expansion will be complete in March 2013. We specialize in machining structural aircraft components and assembly. We also supply our customers with tooling and engineering services, i.e., reverse engineering and digitizing. Our engineering capability is very flexible; we can machine and assemble using part manufacturing information in almost any format. From mylars to digital data, SPM will provide you with a quality product on time. SPM's five 5-axis machines can handle parts up to 144" x 60". Our six 4-axis machines can manage parts up to 172" x 66". SPM is supplying parts and assemblies to the following aerospace companies > Airbus > Boeing > Embraer > Gulfstream > Lockheed Martin > PPG > Triumph Our quality system is third party approved to AS9100C and we are ITAR registered.