QA Technology is globally recognized for remarkable product performance, competitive prices, fast delivery and exceptional service. QA Technology’s comprehensive range of test probes are trusted and specified by designers and engineers in the world’s most recognized technology companies. Our customers know they will produce a higher quality product, meet delivery demands, and achieve higher production yields. QA Technology integraMate® hyperboloid contacts are intended for a wide range of high density, technically sophisticated connector applications. Our patented design provides lower insertion force, closer connector pin spacing, and better protection from damage. We promise total customer satisfaction, and our customers are quick to point out how we deliver on that promise. They recognize the tangible benefits of a quality first partnership: Remarkable Performance: Simply put, our products enable the best electrical contact – however demanding of the application. Outstanding Value: In addition to being competitively priced, QA probes have been proven to last for more cycles than any others on the market. Our integraMate contacts are up to 30% smaller than competitor products. Fast Delivery: Most orders are shipped the same day and delivered within 24 hours. Exceptional Service: Our support team, equipped with extensive customer, industry and product experience, provides highly personalized advice and guidance to ensure ongoing success.

ULVAC Technologies, Inc. (ISO 9001:2008) was established in 1992 as the US subsidiary of ULVAC, Inc. Headquartered in Methuen, Massachusetts, ULVAC Technologies provides Sales and Services to all countries in Western Hemisphere. In addition, this facility is equipped with a class-10 cleanroom for process development, customer demonstration and manufacturing of the ENVIRO solvent-free dry photo resist stripper and Compound Semiconductor Materials Etch Systems. Other in-house services include Foundry Etch (for Deep Oxide and Compound Semiconductor materials), Thermal Processing, Materials Characterization, and Vacuum Pump/Leak Detector Repair. ULVAC Technologies, Inc. has adopted the EU-RoHS Directives in response to rising environmental concerns regarding end of life disposal of electronic equipment and other hazardous substances. After reviewing these directives, we have determined that no elements of our Enviro family of products fall outside of the allowable limits of the EU-RoHS Directives. While most ULVAC Technologies product elements do not fall within the categories covered by these directives, ULVAC Technologies and our suppliers recognize and value the protection of the environment afforded by regulations such as the EU-RoHS Directives. To that end, ULVAC Technologies recommends that end of life disposal be conducted in a manner suitable for the maximum protection of our environment.

HIPER Global designs and delivers tailored compute-based solutions for leading tech and defense companies on a global scale. Offering a full range of world-class hardware platforms and related technical services, HIPER Global works with industry-leading manufacturers to deliver custom or commercial off-the-shelf computing products. Value-add services include design, turnkey manufacturing, custom rugged, global logistics, and support which allow customers to focus on their core competencies and meet product scheduling deadlines.

We're hiring! Visit deltarf.com/opportunities to view our open positions. Experience the Delta Difference. Delta Electronics Manufacturing Corp. is a leading global provider of innovative RF, microwave and millimeter wave interconnect solutions. We’re proud to deliver a world-class customer experience – what we call the Delta Difference – by focusing on four key areas: Purpose, Process, People, and Products/Solutions. Our Services include: - Application engineering - Design consultation and collaboration u 2D and 3D modeling - ANSYS® HFSS models - Precision CNC Turning and Milling - Heat Treating - Electroplating, passivation, pre-tinning u Cable assemblies, transmission lines and related assemblies - Integrated connectorized housings Our Markets - Aerospace - Broadcast/Audio - Communications - Industrial - Medical - Military - Test/Measurement - Transportation We encourage our customers to take the same white-board approach to their design considerations as we use. From modified dielectrics and pin lengths to material and plating specifications, Delta works closely with our customers to fully or partially customize products and solutions. When customer requirements call for enhanced electrical and mechanical performance requirements, Delta delivers the difference. A US Company with Global Operations, Delta’s Global Headquarters in Beverly, MA is a vertically integrated manufacturing facility that features an automated plating line. Globally, Delta has a world-class manufacturing facility in Nanjing, China that mirrors our US manufacturing processes and equipment to ensure the highest quality and consistency of product. In addition, we have a strategic partnership in Taiwan that is also vertically integrated with its own plating line. Lean Manufacturing is the cornerstone of our operations worldwide. Delta offers a full range of interconnect products from DC – 65 GHz and beyond. AS9100 / ISO9001 QMS Certified

Jewell Instruments is a world leader in the manufacture and distribution of acceleration and tilt sensors as well as avionics components, solenoids and panel meters. We provide custom solutions for a diverse group of industries, including aerospace, medical, industrial, telecommunications and many more. Our experienced engineering team works with customers to produce high quality, reliable products that meet or exceed all customer requirements.

GPD Optoelectronics Corp. manufactures Germanium, InGaAs photodiodes with both custom and standard product offerings Serving COTS, Emerging Technologies, and Managed Programs, we value our customers and innovate solutions to support downstream success. GPD operates a wafer fab and manufactures all products in our Salem, NH USA facility. Capabilities include: Design of photodiodes, assembly, and mechanical configurations; Wafer Fab, Assembly & Packaging, MIL-STD-750, MIL-STD-883 compliant, testing, and environmental qualification procedures to support high-reliability products and contracts. Always seeking talented individuals to join our team. email: [email protected] for inquiries. GPD offers a competitive benefits package, including: health/disability/vision/dental insurance, tuition assistance, 401K Visit our website to inquire about products or career opportunities with GPD Optoelectronics Corp. www.gpd-ir.com

SIONYX is a silicon-based photonics company that develops and manufactures proprietary ultra-low-light CMOS image sensors and high-performance night vision cameras. These sensors dramatically enhance the performance of light sensing devices commonly used in commercial, industrial, medical, and defense related applications. The company is proud to be working with the United States Department of Defense (DoD). SiOnyx has supported the U.S. Government (Defense and Intelligence) with advanced imaging and camera technology and recently was awarded a ~$20M contract by the U.S. Army for the delivery of digital night vision cameras for the highly publicized IVAS (Integrated Visual Augmentation System) program. Aurora is the company’s commercially available and award winning night vision camera developed for consumer use. This small, lightweight and all digital camera system can perform in moonless starlight conditions, similar to Gen II tactical night vision analog optics. The Aurora is most commonly used by outdoorsmen, law enforcement, search and rescue, executive protection and mariners around the world. SiOnyx also works with OEMs to provide advanced imaging technology for custom applications. The company provides sensor and camera modules that can be configured and tailored by the customer to satisfy a large array of specialized applications. For more information about SiOnyx, please visit our press room or contact us directly.

Janco Electronics Inc. is a veteran-owned electronics manufacturing services provider that has been in business since 1959. Owned and operated by the Janetos family, we offer a wide range of contract manufacturing services in assembly and high-reliability electro-mechanical systems. Our customers consist of leading companies in the medical, military, commercial, industrial, RF and microwave industries. Our many years of experience in the electronic assembly industry will help you to find solutions to manufacturing problems and provide cost savings on your next project. We offer full turnkey and consignment programs as well as many other stocking programs. Our test capabilities include RF, in-circuit, flying probe and functional test, as well as X-Ray and AOI inspection to facilitate the manufacturing process and ensure we are meeting customer quality metrics. Our quality manager, Jeremy Plante, has a regulatory affairs background and comes from a leading medical device manufacturer. We are ISO 9001:2008 and ISO 13485:2003 certified. We adhere to the following industry standards and conduct formal in-house training on: J-STD 001, IPC 610 Tier II & Tier III. We are FDA Registered, ITAR Registered, and can manufacture to CE, CSA, and UL specifications. Our mission and goal at Janco Electronics Inc. is to consistently provide electronics manufacturing services with high reliability and value to our customers by implementing superior leadership, employee development and recognition, and continuous improvement with social responsibility to our community.

Mainstream Global provides reverse supply chain, ITAD services and solutions to high technology organizations. Verticals include Hyperscale Cloud Providers, Data Centers, Computer OEM's, Technology Leasing Companies and Fortune 500 corporations. Our aftermarket solutions are designed to deliver data security, unique solutions, safe and efficient services and asset recovery value. Our service offerings include; data center managed services, data centers decommissions, equipment moves, data center relocations, new rack installation, retired rack and asset staging and collection. Data bearing device onsite destruction (2mm, 10mm, 20mm), data erasure, value recovery and proper recycling. We have owned and operated facilities throughout Latin America and North America. All are ISO9001, ISO14001, ISO45001 and R2v3 certified.

Stellar Manufacturing Company is a contract manufacturing organization which specializes in solid particle chemical processing and provides services to the chemical, agrochemical, water treatment, polymer, consumer product, mineral and pool & spa industries. Stellar provides compaction granulation, briquetting, blending, tableting, filling, packaging and warehousing services for Fortune 500 and Global 500 companies.

Electronic Industries was established in 1956 in Oshkosh, Wisconsin and has served the electronic industry for over the past 60 years. We are a proud member of the Edge Group, a consortium of over 130 distributors in the United States and Canada carrying a combined inventory of over 3500 product lines. Electronic Industries is primarily a wholesale electronic parts and electronic components distributor. We also handle electronic accessories and equipment, electronic tools and other supplies to better serve both our OEM and MRO customers. Electronic Industries is a franchised stocking distributor for a broad line of elite electronics manufactures such as: Bussmann, Panduit, Fluke, Molex, 3M, Marinco, Blue Sea Systems, Idec, Wago, Weidmuller, and many others.

With more than two decades of experience providing configurable, and custom LED and laser solutions, ProPhotonix offers illumination solutions that meet the most complex requirements. ProPhotonix, part of the Exaktera group has offices and facilities in the USA, Europe and ISO-certified production facilities in Cork, Ireland, and Essex, U.K. Our journey has been defined by excellence in in-house design and manufacturing of configurable and custom LED and Laser solutions. Our expertise in mechanical, optical, electronic, and software engineering runs deep. We have honed our skills in providing the ideal custom solution for an array of applications. From machine vision, UV curing, medical equipment, to autonomous vehicles, 3D printing, and security systems, our solutions are trusted by industries to deliver precision and performance. ProPhotonix is more than an illumination solutions provider; we are your partners in progress. Our collaborative approach ensures that your unique challenges are met with configurable, customized or custom-made solutions. Our dedicated team of experts, coupled with our extensive in-house design and manufacturing capabilities, ensures that every solution we deliver offers a complete solution for your application needs. Experience the ProPhotonix advantage today.